Items

       Specifications

2 – 1

Rated voltage

3.0V / DC3.0V between motor terminals

2 – 2

Operating Voltage Range

DC 1.5 V ~4.0 V between motor terminals

2 – 3

Rated Load

5.0g-cm (by pulley load)

2 – 4

Rotating Direction

Direction CW & CCW when viewed from output shaft side.

2 –5

Operating Temperature Range

At normal humidity.

2 – 6

Storage Temperature Range

At normal humidity.

2 – 7

Operating Position

output shaft all direction

     Items

      Test Conditions

3 – 1

Operating Position

When inspected ,the shaft is horizontal .

3 – 2

Power Source

Regulated DC power supply which assures unquestionable measurement.

3 – 3

Temperature & humidity

In standard test, measurement is to be made at +10℃ ~ +30℃ and relative humidity 45%~85%RH. If the judgment is questionable, the measurement is to be made based on JIS standard testing condition(+18℃ ~ +22℃,60 ~ 70%RH)

3 – 4

Rotating Direction

CW when viewed from output shaft side.

3 – 5

Dimension

Refer to construction drawing.

Items

Test conditions

Specifications

4 – 1

Rated Load Speed

At rated voltage and rated load

3700±370r/min

4 – 2

Rated Load Current

At rated voltage and rated load

100mA max.

4 – 3

No load Speed

At rated voltage and no load

3900±390r/min

4 – 4

No load Current

At rated voltage and no load

35mA max

4 – 5

Starting Torque

At rated voltage and two different load, 0g-cm and 4g-cm

15 g-cm (min.)

4 – 6

Starting Voltage

Under no load

1.0 V (max.)

4 – 7

Insulation Resistance

Measured between terminal and frame with 250V DC megger.

10.0 MΩ(min.)

4 – 8

Starting Current

At rated voltage, rotor position to be 2/3R.(R means the resistance in one pole)

330mA max.

4 – 9

Electrical Noise

To be equipped with
varistor

4 – 10

Reference Characteristic Curve

See attached drawing

Items

Test conditions

Specifications

5 – 1

External Appearance

   Visual

Appropriate for usage.

5 – 2

Shaft end play

Measured by dial gauge.

 0.05 ~ 0.35 mm

5 – 3

Shaft T.I.R

5mm from mounting surface by dial gauge.

Less than 0.03 mm.

5 – 4

Weight

Measured by scale.

Approx. 20g

5 – 5

Mechanical noise

35 dB (max.) No load, rated voltage, with motor to be set and measured as below. Background noise:35 dB max.
 

45dB max.
JIS-A(RMS)

5 – 6

Maximum Axial Load

Direction of static load and support of
load as shown below.
 

10 Kg max

Items

 Test conditions

Specifications

   6 – 1

Life test

1. DC3.0V，5gf-cm
2. Environment：25℃±5℃/65%±20%RH
3. Duty Cycle： As sketched below
4. Life Expectancy：500hours(min.)

1.Rated load speed varies more than ±30% from the initial .
2.Rated load current varies more than ±30% from the initial .
3.Motor gets apparently recognized to be unusable.